CD74HC173M96G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC173 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 7.8mA |
| Number of Bits | 4 |
| Clock Frequency | 60MHz |
| Propagation Delay | 200 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max I(ol) | 0.0078 A |
| Max Propagation Delay @ V, Max CL | 34ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 60 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC173M96G4 Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. Positive Edgeis the trigger it is configured with. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. In this case, the operating temperature is -55°C~125°C TA. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 60MHz Hz. The element count is 1 . There are 16 terminations,Members of the 74HC173family make up this object. The power source is powered by 4.5V. There is 10pF input capacitance for this T flip flop. HC/UHis the family of this D flip flop. It is mounted in the way of Surface Mount. This board has 16 pins. It has a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. The design is based on 4bits. The maximal supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be above 2V. Considering the reliability of this T flip flop, it is well suited for TR. The power supply is 5V. Featuring the maximum design flexibility, it has an output current of 7.8mA . There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. This D latch consumes 8μA quiescent current at all. Additionally, you may refer to the additional WITH DUAL OUTPUT ENABLE of the electronic flip flop.
CD74HC173M96G4 Features
Tape & Reel (TR) package
74HC series
16 pins
4 Bits
5V power supplies
CD74HC173M96G4 Applications
There are a lot of Texas Instruments CD74HC173M96G4 Flip Flops applications.
- Circuit Design
- Parallel data storage
- Common Clocks
- Data Synchronizers
- Bus hold
- Balanced 24 mA output drivers
- Synchronous counter
- QML qualified product
- Frequency Dividers
- Computers
