CD74HC174MG4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 35MHz |
| Pin Count | 16 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Propagation Delay | 165 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 6 |
| Prop. Delay@Nom-Sup | 50 ns |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC174MG4 Overview
The flip flop is packaged in a case of SOIC. D latch consists of 1 elements. Terminations are 16. A voltage of 4.5V is used as the power supply for this D latch. This D flip flop belongs to the family of HC/UH. Surface Mount mounts this electronic component. This board is designed with 16pins on it. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TUBE. Despite external influences, it consumes 8μAof quiescent current. Additionally, there are DUMMY VAL on the electronic flip flop that can be referred to. A -5.2mAvalue is set for the high level output current. It is set to 5.2mAfor low level output current. It is recommended that the operating temperature be lower than 125°C. Operating temperatures should be above -55°C. The minimal supply voltage is 2V. 6Vis the maximum supply voltage supported by it. This can be achieved at a frequency of 35MHz. In this case, it uses a D FLIP-FLOP logic IC. There are 1 functions available on this T flip flop. The D latch is equipped with 16 pins. This flip flop features a maximum design flexibility due to its output current of 5.2mA.
CD74HC174MG4 Features
16 pins
1 Functions
16 pin count
CD74HC174MG4 Applications
There are a lot of Texas Instruments CD74HC174MG4 Flip Flops applications.
- Individual Asynchronous Resets
- EMI reduction circuitry
- Frequency division
- Pattern generators
- Bus hold
- Buffer registers
- High Performance Logic for test systems
- Communications
- Shift registers
- CMOS Process
