CD74HC175M
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 35MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 53 ns |
| fmax-Min | 20 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
CD74HC175M Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. You can find it in the Tubepackage. Currently, the output is configured to use Differential. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at 2V~6Vvolts. A temperature of -55°C~125°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. It belongs to the 74HCseries of FPGAs. You should not exceed 35MHzin the output frequency of the device. In total, there are 1 elements. As a result, it consumes 8μA of quiescent current without being affected by external factors. A total of 16terminations have been recorded. Power is supplied from a voltage of 5V volts. Input capacitance of this device is 10pF farads. A device of this type belongs to the family of HC/UH. Vsup reaches 6V, the maximal supply voltage. The supply voltage (Vsup) should be maintained above 2V for normal operation.
CD74HC175M Features
Tube package
74HC series
CD74HC175M Applications
There are a lot of Rochester Electronics, LLC CD74HC175M Flip Flops applications.
- Shift registers
- Divide a clock signal by 2 or 4
- Frequency Divider circuits
- Digital electronics systems
- ESD performance
- Counters
- Load Control
- Guaranteed simultaneous switching noise level
- Single Up Count-Control Line
- Buffered Clock
