CD74HC175M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 4 |
| Clock Frequency | 35MHz |
| Propagation Delay | 175 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.0052 A |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 53 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 23 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC175M Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. D flip flop is embedded in the Tube package. Differentialis the output configured for it. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. With a supply voltage of 2V~6V volts, it operates. The operating temperature is -55°C~125°C TA. The type of this D latch is D-Type. It belongs to the 74HCseries of FPGAs. A frequency of 35MHzshould not be exceeded by its output. A total of 1 elements are present. A total of 16terminations have been recorded. It is a member of the 74HC175 family. It is powered by a voltage of 4.5V . The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. HC/UHis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. It has a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. The design is based on 4bits. The maximal supply voltage (Vsup) reaches 6V. Normal operation requires a supply voltage (Vsup) above 2V. It operates from 2/6V power supplies. With an output current of 5.2mA, this device offers maximum design flexibility. Despite external influences, it consumes 8μAof quiescent current. 4 channels are available.
CD74HC175M Features
Tube package
74HC series
16 pins
4 Bits
2/6V power supplies
CD74HC175M Applications
There are a lot of Texas Instruments CD74HC175M Flip Flops applications.
- Consumer
- Frequency division
- Pattern generators
- Latch
- Power down protection
- CMOS Process
- ESD protection
- Synchronous counter
- Storage registers
- ESCC
