CD74HC374E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 60MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 250 ns |
| RoHS Status | Non-RoHS Compliant |
CD74HC374E Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. The Tubepackage contains it. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Through Hole. A voltage of 2V~6Vis used as the supply voltage. It is operating at a temperature of -55°C~125°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74HC series. You should not exceed 60MHzin the output frequency of the device. A total of 1 elements are present. There is 8μA quiescent consumption. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A voltage of 5V is used to power it. A 10pFfarad input capacitance is provided by this T flip flop. This D flip flop belongs to the family of HC/UH. Vsup reaches its maximum value at 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. This flip flop has a total of 2ports.
CD74HC374E Features
Tube package
74HC series
CD74HC374E Applications
There are a lot of Rochester Electronics, LLC CD74HC374E Flip Flops applications.
- Single Down Count-Control Line
- Balanced 24 mA output drivers
- Buffer registers
- Frequency Divider circuits
- Bus hold
- Data Synchronizers
- Memory
- Shift Registers
- Data transfer
- Communications
