CD74HC377PWR
| Parameters | |
|---|---|
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 265 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.0052 A |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 53 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| fmax-Min | 23 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
CD74HC377PWR Overview
The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). A package named Tape & Reel (TR)includes it. Currently, the output is configured to use Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis in the way of this electric part. The supply voltage is set to 2V~6V. In this case, the operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 74HCseries of FPGAs. This D flip flop should not have a frequency greater than 60MHz. In total, there are 1 elements. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74HC377 family. A voltage of 5V is used to power it. JK flip flop input capacitance is 10pF farads. Devices in the HC/UHfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. There are 20pins on it. This device has Positive Edgeas its clock edge trigger type. The part is included in FF/Latches. The design is based on 8bits. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be above 2V. Using 8 circuits, it is highly flexible. A reliable performance of this D flip flop makes it well suited for use in TR. In order for the device to operate, it requires 2/6V power supplies. The output current of 5.2mA makes it feature maximum design flexibility. There is a consumption of 8μAof quiescent current from it. Additionally, there are WITH HOLD MODE on the electronic flip flop that can be referred to.
CD74HC377PWR Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
CD74HC377PWR Applications
There are a lot of Texas Instruments CD74HC377PWR Flip Flops applications.
- QML qualified product
- Data Synchronizers
- Count Modes
- Communications
- Balanced 24 mA output drivers
- Consumer
- Shift Registers
- Asynchronous counter
- Automotive
- Differential Individual
