CD74HC534E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 60MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 250 ns |
| RoHS Status | Non-RoHS Compliant |
CD74HC534E Overview
It is embeded in 20-DIP (0.300, 7.62mm) case. D flip flop is included in the Tubepackage. The output it is configured with uses Tri-State, Inverted. The trigger it is configured with uses Positive Edge. Through Holeis in the way of this electric part. The supply voltage is set to 2V~6V. Temperature is set to -55°C~125°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 74HCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 60MHz. In total, it contains 1 elements. There is a consumption of 8μAof quiescent energy. Currently, there are 20 terminations. The D flip flop is powered by a voltage of 5V . This T flip flop has a capacitance of 10pF farads at the input. Devices in the HC/UHfamily are electronic devices. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be kept above 2V. The D flip flop has no ports embedded.
CD74HC534E Features
Tube package
74HC series
CD74HC534E Applications
There are a lot of Rochester Electronics, LLC CD74HC534E Flip Flops applications.
- Safety Clamp
- Frequency Dividers
- Storage registers
- Bus hold
- Divide a clock signal by 2 or 4
- Clock pulse
- High Performance Logic for test systems
- Bounce elimination switch
- Individual Asynchronous Resets
- Dynamic threshold performance
