CD74HC564M96G4
| Parameters | |
|---|---|
| Frequency | 60MHz |
| Pin Count | 20 |
| Number of Elements | 1 |
| Polarity | Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 7.8mA |
| Propagation Delay | 165 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -7.8mA |
| Low Level Output Current | 7.8mA |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
CD74HC564M96G4 Overview
SOICis the way it is packaged. You can find it in the Tape & Reel (TR)package. In total, there are 1 elements. A total of 20 terminations have been made. A voltage of 4.5V is used to power it. Devices in the HC/UHfamily are electronic devices. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 20. Its clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. There are 2 ports embedded in the flip flops. There is a consumption of 8μAof quiescent current from it. There is -7.8mA output current at the high level. It is set to 7.8mAfor the low level output current. A temperature below 125°Cis recommended for operation. The operating temperature should be higher than -55°C. The system operates with a minimum supply voltage of 2V. The maximum supply voltage supported by the flip flop is 6V. The frequency can be set to 60MHz. The logic IC it uses is BUS DRIVER. As a result, it is equipped with 1 functions . This device is equipped with a pin count of 20. As a result of its output current of 7.8mA, it is very flexible in terms of design.
CD74HC564M96G4 Features
Tape & Reel (TR) package
20 pins
1 Functions
20 pin count
CD74HC564M96G4 Applications
There are a lot of Texas Instruments CD74HC564M96G4 Flip Flops applications.
- Dynamic threshold performance
- Communications
- Control circuits
- Data Synchronizers
- Circuit Design
- Buffer registers
- Event Detectors
- Guaranteed simultaneous switching noise level
- Divide a clock signal by 2 or 4
- Shift registers
