CD74HC574M96E4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 250 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC574M96E4 Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tape & Reel (TR)package. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. The operating temperature is -55°C~125°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74HC series. This D flip flop should not have a frequency greater than 60MHz. D latch consists of 1 elements. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. JK flip flop belongs to 74HC574 family. Power is supplied from a voltage of 4.5V volts. The input capacitance of this JK flip flopis 10pF farads. HC/UHis the family of this D flip flop. Surface Mount mounts this electronic component. This board is designed with 20pins on it. This device's clock edge trigger type is Positive Edge. It is part of the Bus Driver/Transceiverbase part number family. An electronic part designed with 8bits is used in this application. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be kept above 2V. In order to achieve its superior flexibility, 8 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TR. The system runs on a power supply of 2/6V watts. The D flip flop has no ports embedded. With a current output of 7.8mA , it offers maximum design flexibility. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 8μA current.
CD74HC574M96E4 Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
CD74HC574M96E4 Applications
There are a lot of Texas Instruments CD74HC574M96E4 Flip Flops applications.
- Frequency Dividers
- Control circuits
- Digital electronics systems
- Safety Clamp
- Single Down Count-Control Line
- Latch-up performance
- Storage registers
- Dynamic threshold performance
- Buffer registers
- ESD protection
