CD74HC73MT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| Type | JK Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC73 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 160 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | Flip-Flop, JK-Type |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 40 ns |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC73MT Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. The Tape & Reel (TR)package contains it. This output is configured with Differential. This trigger uses the value Negative Edge. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. It is at -55°C~125°C TAdegrees Celsius that the system is operating. JK Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74HC series. You should not exceed 60MHzin the output frequency of the device. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74HC73, you will find similar parts. An input voltage of 4.5Vpowers the D latch. The input capacitance of this JK flip flopis 10pF farads. A device of this type belongs to the family of HC/UH. In this case, the electronic component is mounted in the way of Surface Mount. The 14pins are designed into the board. There is a clock edge trigger type of Negative Edgeon this device. The RS flip flops belongs to FF/Latches base part number. It reaches 6Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. In order to achieve its superior flexibility, 2 circuits are used. In light of its reliable performance, this T flip flop is well suited for TR. The 5.2mA output current allows it to be designed with the greatest amount of flexibility. As a result, it consumes 4μA of quiescent current without being affected by external factors.
CD74HC73MT Features
Tape & Reel (TR) package
74HC series
14 pins
CD74HC73MT Applications
There are a lot of Texas Instruments CD74HC73MT Flip Flops applications.
- Storage Registers
- Memory
- Data storage
- Frequency Dividers
- Modulo – n – counter
- Reduced system switching noise
- ESD protection
- Buffer registers
- Storage registers
- Latch
