CD74HCT112E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Subcategory | FF/Latch |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74HCT112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 35 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 14 ns |
| Family | HCT |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 44 ns |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Clock Edge Trigger Type | Negative Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT112E Overview
16-DIP (0.300, 7.62mm)is the packaging method. A package named Tubeincludes it. Currently, the output is configured to use Differential. It is configured with the trigger Negative Edge. It is mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. It is operating at a temperature of -55°C~125°C TA. There is JK Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74HCT series. It should not exceed 60MHzin terms of its output frequency. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74HCT112 family contains this object. A voltage of 5V is used as the power supply for this D latch. There is 10pF input capacitance for this T flip flop. An electronic device belonging to the family HCTcan be found here. There is an electronic component mounted in the way of Through Hole. With its 16pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Negative Edge. This RS flip flops is a part number FF/Latch. To achieve this superior flexibility, 2 circuits are used. The D latch runs on a voltage of 5V volts. For high efficiency, the supply voltage should be set to 5V. Its output current of 4mAallows for maximum design flexibility. It consumes 4μA of quiescent current without being affected by external factors.
CD74HCT112E Features
Tube package
74HCT series
16 pins
5V power supplies
CD74HCT112E Applications
There are a lot of Texas Instruments CD74HCT112E Flip Flops applications.
- Count Modes
- ESD protection
- EMI reduction circuitry
- Balanced Propagation Delays
- Memory
- Communications
- Counters
- Frequency division
- Pattern generators
- Event Detectors
