CD74HCT173ME4
| Parameters | |
|---|---|
| Low Level Output Current | 6mA |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 40 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 4 |
| High Level Output Current | -6mA |
CD74HCT173ME4 Overview
The flip flop is packaged in SOIC. A total of 1elements are contained within it. There have been 16 terminations. It is powered by a voltage of 5V . The electronic device belongs to the HCTfamily. Electronic part Surface Mountis mounted in the way. The electronic flip flop is designed with pins 16. Its clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. It operates from 5V power supplies. High efficiency requires the supply voltage to be maintained at 5V. There are no output lines on the JK flip flop. Quiescent current is consumed by the D latch in the amount of 8μA. Additionally, you may refer to the additional WITH DUAL OUTPUT ENABLE of the electronic flip flop. High level output current is set to -6mA. It is set to 6mAfor the low level output current. It is recommended that the operating temperature be lower than 125°C. Operating temperatures should be above -55°C. It operates with the minimal supply voltage of 4.5V. 5.5Vis the maximum supply voltage it supports. A frequency of 60MHzcan be achieved. It uses the logic IC D FLIP-FLOP. It is equipped with 1 Functions . It is equipped with 16 pins.
CD74HCT173ME4 Features
16 pins
5V power supplies
1 Functions
16 pin count
CD74HCT173ME4 Applications
There are a lot of Texas Instruments CD74HCT173ME4 Flip Flops applications.
- Digital electronics systems
- Buffer registers
- Registers
- Convert a momentary switch to a toggle switch
- Memory
- Storage Registers
- Data storage
- Count Modes
- Balanced 24 mA output drivers
- Latch-up performance
