CD74HCT173MG4
| Parameters | |
|---|---|
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 4 |
| High Level Output Current | -6mA |
| Low Level Output Current | 6mA |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 60MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 40 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
CD74HCT173MG4 Overview
SOICis the packaging method. The list contains 1 elements. The number of terminations is 16. A voltage of 5V provides power to the D latch. In this case, the D flip flop belongs to the HCTfamily. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. The clock edge trigger type for this device is Positive Edge. It is part of the FF/Latchesbase part number family. In view of its reliability, this D flip flop is a good fit for TUBE. It runs on 5Vvolts of power. For high efficiency, the supply voltage should be set to 5V. It consumes 8μA of quiescent current without being affected by external factors. Additionally, you may refer to the D latch's additional WITH DUAL OUTPUT ENABLE. High level output current is set to -6mA. In the low level output current setting, 6mAis used. Temperatures below 125°Care ideal for operating. If the operating temperature is higher than -55°C, the system should operate properly. It is powered by 4.5V as its minimum supply voltage. There is a maximum supply voltage of 5.5V. The frequency that can be achieved is 60MHz. It uses the logic IC D FLIP-FLOP. It has 1 functions. A total of 16 pins are present on this device.
CD74HCT173MG4 Features
16 pins
5V power supplies
1 Functions
16 pin count
CD74HCT173MG4 Applications
There are a lot of Texas Instruments CD74HCT173MG4 Flip Flops applications.
- Patented noise
- Registers
- Guaranteed simultaneous switching noise level
- Consumer
- Load Control
- Counters
- Parallel data storage
- Latch-up performance
- Data Synchronizers
- Computing
