CD74HCT174MG4
| Parameters | |
|---|---|
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 40 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 6 |
| High Level Output Current | -4mA |
| Low Level Output Current | 4mA |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 25MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
CD74HCT174MG4 Overview
In the form of SOIC, it has been packaged. There are 1 elements in it. It has been determined that there have been 16 terminations. A voltage of 5V provides power to the D latch. In terms of electronic devices, this device belongs to the HCTfamily of devices. There is an electronic component mounted in the way of Surface Mount. It is designed with 16 pins. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. This D flip flop is well suited for TUBE based on its reliable performance. An electrical current of 5V volts is applied to it. The supply voltage should be maintained at 5V for high efficiency. Quiescent current is consumed by the D latch in the amount of 8μA. There is also a characteristic of DUMMY VAL. In this case, the high level output current is set to -4mA. There is 4mA output current at the low level. The operating temperature should be lower than 125°C. In order for the system to operate properly, the temperature should be higher than -55°C. It is powered by 4.5V as its minimum supply voltage. There is a maximum supply voltage of 5.5V. This frequency can be achieved at 25MHz. It adopts a logic IC of type D FLIP-FLOP. It is equipped with 1 Functions . There are 16 pins on the D latch.
CD74HCT174MG4 Features
16 pins
5V power supplies
1 Functions
16 pin count
CD74HCT174MG4 Applications
There are a lot of Texas Instruments CD74HCT174MG4 Flip Flops applications.
- ESD protection
- Balanced 24 mA output drivers
- Latch-up performance
- Frequency Divider circuits
- Dynamic threshold performance
- Computing
- Matched Rise and Fall
- Automotive
- Data transfer
- QML qualified product
