CD74HCT175M96E4
| Parameters | |
|---|---|
| Number of Bits per Element | 4 |
| High Level Output Current | -4mA |
| Low Level Output Current | 4mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 33 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
CD74HCT175M96E4 Overview
As a result, it is packaged as SOIC. There is an embedded version in the package Tape & Reel (TR). The element count is 1 . There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The D flip flop is powered by a voltage of 5V . Devices in the HCTfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. There are 16pins on it. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The power supply is 5V. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. As a result, it consumes 8μA of quiescent current without being affected by external factors. In this case, the high level output current is set to -4mA. In the low level output current setting, the current is set to 4mA. Temperatures below 125°Care ideal for operating. Operating temperatures should be above -55°C. In order for it to operate, a supply voltage of 4.5Vis required. The maximum supply voltage supported by the flip flop is 5.5V. This can be achieved at a frequency of 25MHz. The logic IC it adopts is D FLIP-FLOP. Currently, it is equipped with 1 functions . 16pins are provided on the D latch.
CD74HCT175M96E4 Features
Tape & Reel (TR) package
16 pins
5V power supplies
1 Functions
16 pin count
CD74HCT175M96E4 Applications
There are a lot of Texas Instruments CD74HCT175M96E4 Flip Flops applications.
- Circuit Design
- Parallel data storage
- Matched Rise and Fall
- Set-reset capability
- Instrumentation
- ATE
- Differential Individual
- Cold spare funcion
- Modulo – n – counter
- Patented noise
