CD74HCT273M
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 50MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| fmax-Min | 50 MHz |
| RoHS Status | Non-RoHS Compliant |
CD74HCT273M Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). The Tubepackage contains it. T flip flop uses Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -55°C~125°C TAis used in the operation. This electronic flip flop is of type D-Type. The FPGA belongs to the 74HCT series. It should not exceed 50MHzin its output frequency. In total, there are 1 elements. It consumes 8μA of quiescent current without being affected by external factors. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The D flip flop is powered by a voltage of 5V . The input capacitance of this JK flip flopis 10pF farads. It is a member of the HCTfamily of D flip flop. There is a 5.5Vmaximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 4.5V.
CD74HCT273M Features
Tube package
74HCT series
CD74HCT273M Applications
There are a lot of Rochester Electronics, LLC CD74HCT273M Flip Flops applications.
- Storage Registers
- Power down protection
- Registers
- Automotive
- Computers
- Control circuits
- Load Control
- Data transfer
- Frequency Dividers
- Frequency Divider circuits
