CD74HCT377E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 50MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 38ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| fmax-Min | 50 MHz |
| RoHS Status | Non-RoHS Compliant |
CD74HCT377E Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). The package Tubecontains it. There is a Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. Through Holeis positioned in the way of this electronic part. The JK flip flop operates at 4.5V~5.5Vvolts. It is at -55°C~125°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74HCTseries of FPGAs. You should not exceed 50MHzin its output frequency. A total of 1elements are contained within it. During its operation, it consumes 8μA quiescent energy. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is powered by a voltage of 5V . This T flip flop has a capacitance of 10pF farads at the input. It belongs to the family of electronic devices known as HCT. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be kept above 4.5V for normal operation. It is also characterized by WITH HOLD MODE.
CD74HCT377E Features
Tube package
74HCT series
CD74HCT377E Applications
There are a lot of Rochester Electronics, LLC CD74HCT377E Flip Flops applications.
- ESD performance
- Functionally equivalent to the MC10/100EL29
- 2 – Bit synchronous counter
- Frequency division
- Clock pulse
- Matched Rise and Fall
- Count Modes
- Consumer
- Storage registers
- Data Synchronizers
