CD74HCT574QM96G4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 33 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 33ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 50 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Input Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT574QM96G4Q1 Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. It is operating at -40°C~125°C TA. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of Automotive, AEC-Q100, 74HCTseries FPGA. It should not exceed 60MHzin its output frequency. In total, it contains 1 elements. The number of terminations is 20. You can search similar parts based on 74HCT574. A voltage of 5V is used to power it. There is 10pF input capacitance for this T flip flop. Devices in the HCTfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. 20pins are included in its design. Its clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. There are 8bits in this flip flop. Considering the reliability of this T flip flop, it is well suited for TR. There are 5V power supplies attached to it. The flip flop contains 2ports. In order to ensure high efficiency, the supply voltage should remain at 5V. The number of input lines is 8. There is a consumption of 8μAof quiescent current from it.
CD74HCT574QM96G4Q1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74HCT series
20 pins
8 Bits
5V power supplies
CD74HCT574QM96G4Q1 Applications
There are a lot of Texas Instruments CD74HCT574QM96G4Q1 Flip Flops applications.
- Set-reset capability
- Safety Clamp
- Cold spare funcion
- Differential Individual
- Matched Rise and Fall
- Memory
- Bounce elimination switch
- Buffered Clock
- Event Detectors
- Bus hold
