CD74HCT73E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74HCT73 |
| Function | Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 38 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 38 ns |
| Family | HCT |
| Logic Function | Flip-Flop, JK-Type |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 38ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 48 ns |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Clock Edge Trigger Type | Negative Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT73E Overview
The item is packaged in 14-DIP (0.300, 7.62mm)cases. D flip flop is embedded in the Tube package. Differentialis the output configured for it. This trigger is configured to use Negative Edge. Through Holeis in the way of this electric part. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of -55°C~125°C TAis used in the operation. This electronic flip flop is of type JK Type. The 74HCTseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 60MHz. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74HCT73 family. Power is provided by a 5V supply. A JK flip flop with a 10pFfarad input capacitance is used here. Devices in the HCTfamily are electronic devices. Through Hole mounts this electronic component. As you can see from the design, it has pins with 14. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Negative Edge. This RS flip flops is a part number FF/Latches. The power supply is 5V. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. It offers maximum design flexibility with its output current of 4mA. Quiescent current is consumed by the D latch in the amount of 4μA. Currently, there are 2 channels available.
CD74HCT73E Features
Tube package
74HCT series
14 pins
5V power supplies
CD74HCT73E Applications
There are a lot of Texas Instruments CD74HCT73E Flip Flops applications.
- Digital electronics systems
- Individual Asynchronous Resets
- EMI reduction circuitry
- Counters
- Memory
- Test & Measurement
- Divide a clock signal by 2 or 4
- Count Modes
- Parallel data storage
- Shift registers
