CD74HCT73EG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74HCT73 |
| Function | Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Clock Frequency | 60MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 38ns @ 4.5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| RoHS Status | ROHS3 Compliant |
CD74HCT73EG4 Overview
The flip flop is packaged in a case of 14-DIP (0.300, 7.62mm). There is an embedded version in the package Tube. There is a Differentialoutput configured with it. This trigger is configured to use Negative Edge. This electronic part is mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis required for its operation. A temperature of -55°C~125°C TAis used in the operation. It is an electronic flip flop with the type JK Type. This type of FPGA is a part of the 74HCT series. Its output frequency should not exceed 60MHz Hz. There are 2 elements in it. This process consumes 4μA quiescents. The 74HCT73 family contains it. Input capacitance of this device is 10pF farads.
CD74HCT73EG4 Features
Tube package
74HCT series
CD74HCT73EG4 Applications
There are a lot of Texas Instruments CD74HCT73EG4 Flip Flops applications.
- Circuit Design
- Synchronous counter
- ESCC
- Clock pulse
- Automotive
- Pattern generators
- Storage registers
- Divide a clock signal by 2 or 4
- Single Down Count-Control Line
- Dynamic threshold performance
