CD74HCT73M
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Additional Feature | MASTER SLAVE OPERATION |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 60MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 38ns @ 4.5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 48 ns |
| fmax-Min | 60 MHz |
| RoHS Status | Non-RoHS Compliant |
CD74HCT73M Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. It is included in the package Tube. As configured, the output uses Differential. Negative Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. The operating temperature is -55°C~125°C TA. JK Typeis the type of this D latch. It belongs to the 74HCTseries of FPGAs. This D flip flop should not have a frequency greater than 60MHz. A total of 2elements are contained within it. There is 4μA quiescent consumption. It has been determined that there have been 14 terminations. An input voltage of 5Vpowers the D latch. Its input capacitance is 10pF farads. An electronic device belonging to the family HCTcan be found here. Vsup reaches 5.5V, the maximal supply voltage. The supply voltage (Vsup) should be kept above 4.5V for normal operation. Additionally, there are MASTER SLAVE OPERATION on the electronic flip flop that can be referred to.
CD74HCT73M Features
Tube package
74HCT series
CD74HCT73M Applications
There are a lot of Rochester Electronics, LLC CD74HCT73M Flip Flops applications.
- Differential Individual
- Count Modes
- Parallel data storage
- Data transfer
- Clock pulse
- 2 – Bit synchronous counter
- Consumer
- Patented noise
- Balanced Propagation Delays
- Memory
