CD74HCT74E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 17 hours ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 35 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 35 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 53 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT74E Overview
It is packaged in the way of 14-DIP (0.300, 7.62mm). There is an embedded version in the package Tube. As configured, the output uses Differential. JK flip flop uses Positive Edgeas the trigger. Through Holeis occupied by this electronic component. The JK flip flop operates at a voltage of 4.5V~5.5V. In this case, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 74HCTseries of FPGAs. It should not exceed 50MHzin terms of its output frequency. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74HCT74family includes it. A voltage of 5V provides power to the D latch. There is 10pF input capacitance for this T flip flop. HCTis the family of this D flip flop. There is an electronic part that is mounted in the way of Through Hole. 14pins are included in its design. It has a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. In order to achieve its superior flexibility, 2 circuits are used. It runs on 5Vvolts of power. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. In addition to its maximum design flexibility, the output current of the T flip flop is 4mA. It has 1 output lines to operate. Despite external influences, it consumes 4μAof quiescent current.
CD74HCT74E Features
Tube package
74HCT series
14 pins
5V power supplies
CD74HCT74E Applications
There are a lot of Texas Instruments CD74HCT74E Flip Flops applications.
- Automotive
- Count Modes
- Balanced Propagation Delays
- Individual Asynchronous Resets
- Supports Live Insertion
- Parallel data storage
- Clock pulse
- Dynamic threshold performance
- QML qualified product
- Circuit Design
