CDCE706PWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Spread Spectrum Clock Driver |
| Max Power Dissipation | 600mW |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 300MHz |
| Base Part Number | CDCE706 |
| Output | LVCMOS |
| Pin Count | 20 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Nominal Supply Current | 115mA |
| Max Supply Current | 115mA |
| Input | LVCMOS, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 200MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/No |
| Input Current | 5μA |
| Divider/Multiplier | Yes/Yes |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDCE706PWG4 Overview
As a clock IC, it uses the Tube package. As part of the 20-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. As a result of this, we can find 20 terminations. This time clock generator should be voltaged at 3.3V. There is a Clock PLL called LVCMOS, Crystal which is designed to be the input to this clock generator. For a full understanding of the electronic part's performance, 1 circuits are implemented. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. An electrical part such as this one can be classified as a Spread Spectrum Clock Driver component. It is a 20-bit clock PLL designed specifically for microprocessors. Related electrical parts can be found for the base part number CDCE706. There are 20 pins that are available on the clock PLL. The maximum supply voltage that analog clock generator can handle is 3.3V. The output frequency is magnified as high as possible with 6 signal outputs. Frequency generator is able to reali300MHze high efficiency when operating at a frequency of 300MHz. IC clock generator consists of 3 elements. During these clock generator operations, the maximum current supplied reaches 115mA.
CDCE706PWG4 Features
Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDCE706PWG4 Applications
There are a lot of Texas Instruments CDCE706PWG4 Clock Generators applications.
- Mobile telephones
- Line cards used in telephone exchange
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Automatic control
- Symbol synchronization
- DVD recorders
- Deep space exploration
- Wireless infrastructure
- PCI express cards
- Main oscillator in receiver
