CLVC1G374QDCKRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC1G374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Clock Frequency | 175MHz |
| Propagation Delay | 5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 40mA 40mA |
| Max Propagation Delay @ V, Max CL | 5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CLVC1G374QDCKRQ1 Overview
As a result, it is packaged as 6-TSSOP, SC-88, SOT-363. D flip flop is included in the Tape & Reel (TR)package. There is a Tri-State, Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at 1.65V~5.5Vvolts. In this case, the operating temperature is -40°C~125°C TA. This D latch has the type D-Type. The FPGA belongs to the Automotive, AEC-Q100, 74LVC series. A frequency of 175MHzshould not be exceeded by its output. A total of 6terminations have been recorded. The 74LVC1G374family includes it. The D flip flop is powered by a voltage of 1.8V . Input capacitance of this device is 3pF farads. A device of this type belongs to the family of LVC/LCX/Z. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 6 pins. There is a clock edge trigger type of Positive Edgeon this device. The part you are looking for is included in FF/Latches. The design is based on 1bits. 5.5Vis the maximum supply voltage (Vsup). The superior flexibility of this product is achieved by using 1 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. The flip flop has 2embedded ports. In order for the chip to function, it has 3output lines. This D latch consumes 10μA quiescent current at all.
CLVC1G374QDCKRQ1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74LVC series
6 pins
1 Bits
CLVC1G374QDCKRQ1 Applications
There are a lot of Texas Instruments CLVC1G374QDCKRQ1 Flip Flops applications.
- Patented noise
- Single Down Count-Control Line
- Guaranteed simultaneous switching noise level
- Supports Live Insertion
- Dynamic threshold performance
- Data transfer
- Buffer registers
- Storage registers
- 2 – Bit synchronous counter
- Frequency Divider circuits
