CS2841BEDR14
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 23 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CS2841 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.4V~40V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 8.4V |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 52kHz |
| Max Duty Cycle | 50 % |
| Switching Frequency | 60kHz |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CS2841BEDR14 Overview
This switching controller fits most application requirements since it is packaged in a 14-SOIC (0.154, 3.90mm Width) package. There is sufficient capacity to generate switching controller for outputs 1. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control operates at 7.4V~40V and has a 7.4V~40V supply voltage. Worked in a -40°C~85°C TA dc switcher before. dc dc regulator is made easier with Surface Mount. To ensure efficient switching, this dcdc regulator features a Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Different dc switching's functions can be applied to 14 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. CS2841 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 14 pins. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 8.4V as the minimum input voltage of dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 5.1V. The dc dc regulator's usual output current is 1A, which should be noted down when you start a project. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. DC regulators have a maximum frequency of 52kHz. At 60kHz, this controller will mostly work as expected.
CS2841BEDR14 Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Switching Frequency: 60kHz
CS2841BEDR14 Applications
There are a lot of ON Semiconductor CS2841BEDR14 DC to DC converter applications.
- Electrical distribution systems
- PSRR circuits
- Sensitive electronic devices
- Emergency lighting monitoring equipment
- Precision electronic equipment
- Geothermal power
- Milling machines
- Network technology
- Serial communication converter
- Product burn-in
