CS51022ADBG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | CS51022A |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.7V~20V |
| Control Features | Current Limit, Soft Start |
| Input Voltage (Min) | 8.2V |
| Topology | Flyback, Forward Converter, Push-Pull |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 15 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 83 % |
| Duty Cycle | 83 % |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CS51022ADBG Overview
In the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. There is a Tube solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. This dc control operates at 7.7V~20V and has a 7.7V~20V supply voltage. Suitable for a -40°C~85°C TA dc switcher. dc dc regulators can be carried out with Surface Mount. To provide efficient switching control, Current Limit, Soft Start is included in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 14V volts. CS51022A can be used to locate other relevant dc to dc converter ics. There are 16 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. An input voltage of 8.2V is the minimum required for the dc dc voltage regulator. At most, the dc to dc regulator accepts 20V input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. It is set to 83 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator1MHz has the maximum frequency.
CS51022ADBG Features
Transistor Driver Outputs
Current Limit, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 83 %
CS51022ADBG Applications
There are a lot of ON Semiconductor CS51022ADBG DC to DC converter applications.
- Domestic water pumps
- Computer application technology
- Thermal power
- Hydraulic presses
- Motor controller circuits
- Boring machines
- Post equipment
- Program control systems
- Photovoltaic power
- Flaw detection equipment
