CY22150KFI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | TIN LEAD |
| Subcategory | Clock Generators |
| Voltage - Supply | 2.375V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY22150 |
| Output | CMOS |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Power Dissipation | 380mW |
| Max Supply Current | 45mA |
| Frequency (Max) | 166.6MHz |
| Input | LVCMOS, LVTTL, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 30MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| RoHS Status | Non-RoHS Compliant |
CY22150KFI Overview
A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. Clock PLL is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain 225 degrees of temperature during reflowing. 16 terminations can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This Clock PLL will be fed by LVCMOS, LVTTL, Crystal as its input. 1 circuits are implemented to access the electronic component's full performance. An upper frequency limit of 166.6MHz Max can be achieved with this clock-based frequency synthesizer. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Clock generator ic works with 2.375V~3.465V. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. A frequency synthesizer which is compatible with the CMOS logic levels is presented here. A Clock Generator, Fanout Distribution is a classification for the electronic part in question. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. The related electronic parts of part number CY22150 are listed below. PF synthesizers is equipped with 16 pins. Supply voltage 3.3V is what time clock generator can handle. Fundamentally, this is a kind of Clock Generators clock PLL. This frequency synthesizer operates at a maximum current of 45mA.
CY22150KFI Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22150KFI Applications
There are a lot of Cypress Semiconductor Corp CY22150KFI Clock Generators applications.
- CB radios
- Digital circuits
- Bluetooth transmitters
- Pulsed digital systems
- Local oscillator source in receiver
- Automatic control
- Frequency synthesis
- Sampling clocks for ADC and DAC
- Cellular/4G
- Broadcast communication
