CY23FP12OXCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY23FP12 |
| Output | LVCMOS |
| Pin Count | 28 |
| Number of Outputs | 12 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Number of Circuits | 1 |
| Nominal Supply Current | 120mA |
| Frequency (Max) | 200MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 2:12 |
| Max I(ol) | 0.02 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.4 ns |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY23FP12OXCT Overview
Tape & Reel (TR)-method packaging is used for clock ICs. As part of the 28-SSOP (0.209, 5.30mm Width) package, this clock generator is embedded. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. There are a total of 28 terminations in this file. This electronic frequency generator requires a voltage of 3.3V. LVCMOS, LVTTL is designed as this clock generator's input. For full access to the electronic component's capabilities, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 200MHz. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. 3.465V would be the maximum supply voltage for this clock generator. There should be 2.5V 3.3V provided with this RF synthesizer. The temperature should be set at 0°C~70°C to ensure reliable performance. LVCMOS logic levels are supported by this RF synthesizer. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. In particular, this clock PLL is designed to be used with microprocessors. The related electrical components for the base part number CY23FP12 can be found below. There is an available 28 pin on the clock generators. The supply voltage should be maintained at 3.3V for high efficiency. In general, this clock PLL is considered a Clock Drivers device. 12 signal outputs are provided for enhancing output frequency as much as possible. As a result of this digital clock generator, there is a low timing skew at 0.4 ns max.
CY23FP12OXCT Features
Available in the 28-SSOP (0.209, 5.30mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY23FP12OXCT Applications
There are a lot of Cypress Semiconductor Corp CY23FP12OXCT Clock Generators applications.
- Mechanical devices
- Cable television converter boxes
- FM demodulation networks for FM operations
- Wireless infrastructure
- Clock recovery
- Frequency Modulation (FM) stereo decoders
- Peripheral devices
- Automatic control system test
- CPUs
- GPS systems
