banner_page

CY74FCT162374TPVC

4.5V~5.5V D-Type Flip Flop DUAL 500μA 74FCT Series 48-BSSOP (0.295, 7.50mm Width)


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-CY74FCT162374TPVC
  • Package: 48-BSSOP (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 451
  • Description: 4.5V~5.5V D-Type Flip Flop DUAL 500μA 74FCT Series 48-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 48-BSSOP (0.295, 7.50mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C TA
Packaging Tube
Series 74FCT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 48
Type D-Type
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 5V
Terminal Pitch 0.635mm
Function Standard
Qualification Status COMMERCIAL
Output Type Tri-State, Non-Inverted
Number of Elements 2
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 4.5V
Number of Ports 2
Family FCT
Current - Quiescent (Iq) 500μA
Output Characteristics 3-STATE WITH SERIES RESISTOR
Current - Output High, Low 24mA 24mA
Output Polarity TRUE
Number of Bits per Element 8
Trigger Type Positive Edge
Input Capacitance 4.5pF
Propagation Delay (tpd) 10 ns
Width 7.5mm
RoHS Status ROHS3 Compliant

CY74FCT162374TPVC Overview


It is packaged in the way of 48-BSSOP (0.295, 7.50mm Width). A package named Tubeincludes it. There is a Tri-State, Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74FCTseries of FPGAs. A total of 2elements are present in it. It consumes 500μA of quiescent It has been determined that there have been 48 terminations. The power supply voltage is 5V. Input capacitance of this device is 4.5pF farads. FCTis the family of this D flip flop. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be above 4.5V. This flip flop has a total of 2ports.

CY74FCT162374TPVC Features


Tube package
74FCT series

CY74FCT162374TPVC Applications


There are a lot of Rochester Electronics, LLC CY74FCT162374TPVC Flip Flops applications.

  • Reduced system switching noise
  • Patented noise
  • Computers
  • ESD protection
  • Shift Registers
  • Frequency division
  • Matched Rise and Fall
  • Registers
  • Automotive
  • Data transfer

Write a review

Note: HTML is not translated!
    Bad           Good