CY74FCT16374ATPACT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 16 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT16374ATPACT Overview
The flip flop is packaged in 48-TFSOP (0.240, 6.10mm Width). Package Tape & Reel (TR)embeds it. T flip flop uses Tri-State, Non-Invertedas the output. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. With a supply voltage of 4.5V~5.5V volts, it operates. -40°C~85°C TAis the operating temperature. D-Typedescribes this flip flop. This type of FPGA is a part of the 74FCT series. In total, there are 2 elements. Despite external influences, it consumes 500μAof quiescent current. A total of 48 terminations have been made. The 74FCT16374 family contains this object. A voltage of 5V provides power to the D latch. A JK flip flop with a 4.5pFfarad input capacitance is used here. In this case, the D flip flop belongs to the FCTfamily. In this case, the electronic component is mounted in the way of Surface Mount. This board is designed with 48pins on it. This device's clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. This flip flop is designed with 16 Bits. Considering its reliability, this T flip flop is well suited for TR. There are 5V power supplies attached to it. The flip flop has 2ports embedded within it. High efficiency requires the supply voltage to be maintained at 5V. The output current of 64mA makes it feature maximum design flexibility. It operates with 8 output lines. As a result, it consumes 5μA of quiescent current without being affected by external factors.
CY74FCT16374ATPACT Features
Tape & Reel (TR) package
74FCT series
48 pins
16 Bits
5V power supplies
CY74FCT16374ATPACT Applications
There are a lot of Texas Instruments CY74FCT16374ATPACT Flip Flops applications.
- Circuit Design
- ESCC
- High Performance Logic for test systems
- Memory
- Computers
- Frequency Divider circuits
- Frequency Dividers
- Consumer
- Matched Rise and Fall
- Modulo – n – counter
