CY74FCT16374ATPVCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74FCT16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 16 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT16374ATPVCT Overview
The flip flop is packaged in 48-BSSOP (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger is configured to use Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. A temperature of -40°C~85°C TAis considered to be the operating temperature. This D latch has the type D-Type. The 74FCTseries comprises this type of FPGA. D latch consists of 2 elements. There is a consumption of 500μAof quiescent energy. In 48terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74FCT16374. A voltage of 5V is used as the power supply for this D latch. A 4.5pFfarad input capacitance is provided by this T flip flop. FCTis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. This board is designed with 48pins on it. This device has Positive Edgeas its clock edge trigger type. The part is included in Bus Driver/Transceiver. Flip flops designed with 16bits are used in this part. A reliable performance of this D flip flop makes it well suited for use in TR. It operates from 5V power supplies. The flip flop has 2embedded ports. In order to ensure high efficiency, the supply voltage should remain at 5V. Featuring the maximum design flexibility, it has an output current of 64mA . There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. There is 5μA quiescent current consumption by it.
CY74FCT16374ATPVCT Features
Tape & Reel (TR) package
74FCT series
48 pins
16 Bits
5V power supplies
CY74FCT16374ATPVCT Applications
There are a lot of Texas Instruments CY74FCT16374ATPVCT Flip Flops applications.
- Shift registers
- Synchronous counter
- Balanced Propagation Delays
- Data transfer
- Patented noise
- Clock pulse
- Counters
- Consumer
- Reduced system switching noise
- Bus hold
