CY74FCT16823CTPACT
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT16823 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 18 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 12.5ns @ 5V, 300pF |
| Prop. Delay@Nom-Sup | 6 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CY74FCT16823CTPACT Overview
The flip flop is packaged in 56-TFSOP (0.240, 6.10mm Width). D flip flop is embedded in the Tape & Reel (TR) package. There is a Tri-State, Non-Invertedoutput configured with it. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. It is operating at -40°C~85°C TA. It is an electronic flip flop with the type D-Type. It belongs to the 74FCTseries of FPGAs. A total of 2 elements are present. This process consumes 500μA quiescents. A total of 56 terminations have been made. The 74FCT16823family includes it. The D flip flop is powered by a voltage of 5V . The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. The electronic device belongs to the FCTfamily. There is an electronic component mounted in the way of Surface Mount. 56pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. The part is included in FF/Latches. An electronic part with 18bits has been designed. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. There are 5V power supplies attached to it. A D flip flop with 2embedded ports is available. For high efficiency, the supply voltage should be kept at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 64mA. In order for the chip to function, it has 9output lines.
CY74FCT16823CTPACT Features
Tape & Reel (TR) package
74FCT series
56 pins
18 Bits
5V power supplies
CY74FCT16823CTPACT Applications
There are a lot of Texas Instruments CY74FCT16823CTPACT Flip Flops applications.
- Automotive
- Supports Live Insertion
- Dynamic threshold performance
- Communications
- Digital electronics systems
- ESCC
- Count Modes
- Pattern generators
- Power down protection
- Memory
