CY74FCT2573ATPWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74FCT2573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT2573ATPWR Overview
The package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). Tape & Reel (TR) is the way it is packaged. It is configured with an output of Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. A Surface Mount mount is used for mounting this electronic part. There is no supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. The 74FCT series contains FPGAs of this type. Electronic parts with 8 bits are designed for this application. A device with this design has 20 terminations. 74FCT2573 is the family name of it. With a supply voltage of 5V, it operates. It has 20 pins that makes it easy to use. In the world of electronics, this electronic device belongs to the family of FCT. This board has 20 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. In this device, there are 2 ports. This part can be found within the FF/Latches subcategory. It is possible to reach 5.25V when the maximum supply voltage (Vsup) has been reached. The device is powered by 5V power supplies. It is recommended that the supply voltage (Vsup) be greater than 4.75V. Electronic circuits are represented by 8 input lines. Based on its reliable performance, this device is suitable for TAPE AND REEL. The current consumed by the device is 100μA volts in quiescent mode, which cannot be affected by external factors.
CY74FCT2573ATPWR Features
20-TSSOP (0.173, 4.40mm Width) package
74FCT series
8 Bits
74FCT2573 family
20 pin count
20 pins
5V power supplies
CY74FCT2573ATPWR Applications
There are a lot of Texas Instruments CY74FCT2573ATPWR Latches applications.
- Up/down difference counting
- Double bus register system
- Shift register
- Decade counting
- A/D converters
- Buffer Storage
- Timers
- Phase comparator
- Automotive Infotainment
- A/D and D/A conversion
