CY74FCT273ATSOC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 7.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 7.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT273ATSOC Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. It is contained within the Tubepackage. Non-Invertedis the output configured for it. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.75V~5.25V. In this case, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. The FPGA belongs to the 74FCT series. In total, it contains 1 elements. There is a consumption of 200μAof quiescent energy. There have been 20 terminations. It is a member of the 74FCT273 family. The D flip flop is powered by a voltage of 5V . Its input capacitance is 5pF farads. It is a member of the FCTfamily of D flip flop. Surface Mount mounts this electronic component. The 20pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. This device is part of the FF/Latchesbase part number family. The design is based on 8bits. The D latch runs on a voltage of 5V volts. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. This T flip flop features a maximum design flexibility due to its output current of 64mA. The number of input lines is 8.
CY74FCT273ATSOC Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT273ATSOC Applications
There are a lot of Texas Instruments CY74FCT273ATSOC Flip Flops applications.
- Data Synchronizers
- Storage Registers
- Memory
- Functionally equivalent to the MC10/100EL29
- Single Down Count-Control Line
- Digital electronics systems
- Synchronous counter
- Frequency Dividers
- Shift registers
- 2 – Bit synchronous counter
