CY74FCT273CTSOC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.8 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT273CTSOC Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. Package Tubeembeds it. There is a Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. A supply voltage of 4.75V~5.25V is required for operation. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74FCT series. In total, there are 1 elements. During its operation, it consumes 200μA quiescent energy. It has been determined that there have been 20 terminations. The 74FCT273family includes it. A voltage of 5V provides power to the D latch. There is 5pF input capacitance for this T flip flop. In terms of electronic devices, this device belongs to the FCTfamily of devices. This electronic part is mounted in the way of Surface Mount. 20pins are included in its design. Its clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with 8bits. The power supply is 5V. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. This T flip flop features a maximum design flexibility due to its output current of 64mA. It has 8lines.
CY74FCT273CTSOC Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT273CTSOC Applications
There are a lot of Texas Instruments CY74FCT273CTSOC Flip Flops applications.
- Buffered Clock
- Patented noise
- Digital electronics systems
- Pattern generators
- Convert a momentary switch to a toggle switch
- Computers
- Control circuits
- Single Up Count-Control Line
- Circuit Design
- Counters
