CY74FCT273TSOCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 13ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT273TSOCT Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). It is included in the package Tape & Reel (TR). The output it is configured with uses Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. The supply voltage is set to 4.75V~5.25V. It is operating at a temperature of -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74FCT series. In total, there are 1 elements. There is a consumption of 200μAof quiescent energy. Terminations are 20. Members of the 74FCT273family make up this object. Power is supplied from a voltage of 5V volts. Input capacitance of this device is 5pF farads. In terms of electronic devices, this device belongs to the FCTfamily of devices. Surface Mount mounts this electronic component. The 20pins are designed into the board. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. Flip flops designed with 8bits are used in this part. This D flip flop is well suited for TR based on its reliable performance. It operates from 5V power supplies. In order to achieve high efficiency, the supply voltage should be maintained at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 64mA. This input has 8lines.
CY74FCT273TSOCT Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT273TSOCT Applications
There are a lot of Texas Instruments CY74FCT273TSOCT Flip Flops applications.
- Communications
- Digital electronics systems
- Supports Live Insertion
- Single Up Count-Control Line
- Shift Registers
- Functionally equivalent to the MC10/100EL29
- Control circuits
- Latch
- Data storage
- Counters
