CY74FCT374ATSOCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 250MHz |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT374ATSOCT Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. D flip flop is embedded in the Tape & Reel (TR) package. T flip flop uses Tri-State, Non-Invertedas the output. There is a trigger configured with Positive Edge. Surface Mountmounts this electrical part. A 4.75V~5.25Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74FCT series. This D flip flop should not have a frequency greater than 250MHz. D latch consists of 1 elements. As a result, it consumes 200μA quiescent current and is not affected by external forces. There have been 20 terminations. The 74FCT374 family contains it. It is powered by a voltage of 5V . Its input capacitance is 5pFfarads. Devices in the FCTfamily are electronic devices. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. In this device, the clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. The design is based on 8bits. 8 circuits are used to achieve its superior flexibility. Considering the reliability of this T flip flop, it is well suited for TR. In order for the device to operate, it requires 5V power supplies. The flip flop has 2embedded ports. High efficiency requires the supply voltage to be maintained at 5V. With a current output of 64mA , it offers maximum design flexibility. It is designed with 3 output lines.
CY74FCT374ATSOCT Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT374ATSOCT Applications
There are a lot of Texas Instruments CY74FCT374ATSOCT Flip Flops applications.
- Reduced system switching noise
- Single Up Count-Control Line
- Control circuits
- Registers
- Functionally equivalent to the MC10/100EL29
- Load Control
- Digital electronics systems
- Memory
- ATE
- Computing
