CY74FCT377ATSOC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT377 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 7.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 7.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT377ATSOC Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). It is contained within the Tubepackage. T flip flop is configured with an output of Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.75V~5.25V. It is operating at a temperature of -40°C~85°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74FCT series. A total of 1 elements are present. As a result, it consumes 200μA of quiescent current without being affected by external factors. Terminations are 20. D latch belongs to the 74FCT377 family. It is powered by a voltage of 5V . A 5pFfarad input capacitance is provided by this T flip flop. An electronic device belonging to the family FCTcan be found here. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with 8bits. A power supply of 5Vis required to operate it. Optimal efficiency requires a supply voltage of 5V. It offers maximum design flexibility with its output current of 64mA. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
CY74FCT377ATSOC Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT377ATSOC Applications
There are a lot of Texas Instruments CY74FCT377ATSOC Flip Flops applications.
- Patented noise
- Computers
- Single Up Count-Control Line
- Functionally equivalent to the MC10/100EL29
- Bounce elimination switch
- Convert a momentary switch to a toggle switch
- Modulo – n – counter
- Data transfer
- Matched Rise and Fall
- Digital electronics systems
