CY74FCT823ATQCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.64mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT823 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 9 |
| Propagation Delay | 20 ns |
| Quiescent Current | 200μA |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 20ns @ 5V, 300pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Input Lines | 9 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT823ATQCT Overview
It is packaged in the way of 24-SSOP (0.154, 3.90mm Width). A package named Tape & Reel (TR)includes it. Tri-State, Non-Invertedis the output configured for it. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to 4.75V~5.25V. Currently, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74FCTseries FPGA. A total of 1 elements are present. A total of 24terminations have been recorded. D latch belongs to the 74FCT823 family. It is powered from a supply voltage of 5V. A JK flip flop with a 5pFfarad input capacitance is used here. The electronic device belongs to the FCTfamily. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 24 pins. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. It is designed with 9bits. Considering the reliability of this T flip flop, it is well suited for TR. An electrical current of 5V volts is applied to it. A total of 2ports are embedded in the D flip flop. Optimal efficiency requires a supply voltage of 5V. Featuring the maximum design flexibility, it has an output current of 64mA . It has 9lines. As a result, it consumes 200μA of quiescent current without being affected by external factors.
CY74FCT823ATQCT Features
Tape & Reel (TR) package
74FCT series
24 pins
9 Bits
5V power supplies
CY74FCT823ATQCT Applications
There are a lot of Texas Instruments CY74FCT823ATQCT Flip Flops applications.
- Bounce elimination switch
- Buffer registers
- Registers
- Single Up Count-Control Line
- Common Clocks
- Circuit Design
- Storage registers
- Supports Live Insertion
- Latch-up performance
- Memory
