CY74FCT823CTQCTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74FCT823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 9 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 12.5ns @ 5V, 300pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 83300000Hz |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT823CTQCTG4 Overview
As a result, it is packaged as 24-SSOP (0.154, 3.90mm Width). You can find it in the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.75V~5.25V. -40°C~85°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74FCT series. In total, it contains 1 elements. It consumes 200μA of quiescent In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74FCT823 family. The power supply voltage is 5V. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It belongs to the family of electronic devices known as FCT. It is mounted in the way of Surface Mount. There are 24pins on it. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. There are 9bits in this flip flop. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. This D flip flop is equipped with 0 ports. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. With an output current of 64mA, it is possible to design the device in any way you want. It has 9lines.
CY74FCT823CTQCTG4 Features
Tape & Reel (TR) package
74FCT series
24 pins
9 Bits
5V power supplies
CY74FCT823CTQCTG4 Applications
There are a lot of Texas Instruments CY74FCT823CTQCTG4 Flip Flops applications.
- CMOS Process
- Bus hold
- Instrumentation
- Synchronous counter
- Latch-up performance
- Consumer
- Data transfer
- Balanced 24 mA output drivers
- Circuit Design
- Supports Live Insertion
