CY74FCT825ATSOCTE4
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Base Part Number | 74FCT825 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 20ns @ 5V, 300pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
CY74FCT825ATSOCTE4 Overview
24-SOIC (0.295, 7.50mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. There is a Tri-State, Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 4.75V~5.25Vvolts. The operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74FCT series. In total, it contains 1 elements. As a result, it consumes 200μA of quiescent current without being affected by external factors. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74FCT825. A voltage of 5V provides power to the D latch. Its input capacitance is 5pF farads. An electronic device belonging to the family FCTcan be found here. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 24. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. 8bits are used in its design. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. There are 5V power supplies attached to it. The flip flop contains 2ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. This input has 8lines in it.
CY74FCT825ATSOCTE4 Features
Tape & Reel (TR) package
74FCT series
24 pins
8 Bits
5V power supplies
CY74FCT825ATSOCTE4 Applications
There are a lot of Texas Instruments CY74FCT825ATSOCTE4 Flip Flops applications.
- ESD protection
- QML qualified product
- Count Modes
- Latch
- Storage registers
- Shift Registers
- Data Synchronizers
- Storage Registers
- Frequency Dividers
- Patented noise
