Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Weight |
1.627801g |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2000 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
85Ohm |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
470mW |
Technology |
CMOS |
Number of Functions |
4 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Power Supplies |
512/+-15V |
Max Supply Voltage |
25V |
Min Supply Voltage |
4.5V |
Power Dissipation |
470mW |
Max Supply Current |
10μA |
Turn On Delay Time |
300 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
4.5V~25V ±4.5V~22V |
Supply Type |
Dual, Single |
Turn-Off Delay Time |
200 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
85Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
5pF 5pF |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
300ns, 200ns |
Charge Injection |
1pC |
Channel-to-Channel Matching (ΔRon) |
2 Ω |
Crosstalk |
-95dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Drain to Source Resistance |
85Ohm |
Normal Position |
NC |
Height |
3.81mm |
Length |
21.33mm |
Width |
7.11mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
Non-RoHS Compliant |
DG211BDJ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Through Hole. 1:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, 16 terminations have occurred. The electrical component body receives 16 pins. Based on SPST - NC switching circuits, these analog multiplexers work. There is 85Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 4.5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 10μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. When using dual power supplies, you should attach at least 4.5V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. It is possible to operate 4 inputs. Drain to Source resistance for this electronic component is 85Ohm.
DG211BDJ Features
Switch Circuit: SPST - NC
Drain-to-Source resistance: 85Ohm
DG211BDJ Applications
There are a lot of Vishay Siliconix DG211BDJ Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Battery Powered Instruments
- Audio signal routing
- Cable Modem
- E1 Multiplexer
- Signal routing between systems
- New designs requiring multiplexer functions
- Digital cross connects (DSX-1)
- Sample-and-hold systems
- Private Branch Exchange (PBX)