DM74ALS374N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 35MHz |
| Family | ALS |
| Current - Quiescent (Iq) | 19mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 16ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
DM74ALS374N Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. There is an embedded version in the package Tube. As configured, the output uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. The operating temperature is 0°C~70°C TA. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74ALSseries of FPGAs. In order for it to function properly, its output frequency should not exceed 35MHz. A total of 1elements are contained within it. T flip flop consumes 19mA quiescent energy. 20terminations have occurred. Power is provided by a 5V supply. ALSis the family of this D flip flop. Vsup reaches its maximum value at 5.5V. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. The flip flop has 2ports embedded within it.
DM74ALS374N Features
Tube package
74ALS series
DM74ALS374N Applications
There are a lot of Rochester Electronics, LLC DM74ALS374N Flip Flops applications.
- Synchronous counter
- Data Synchronizers
- Matched Rise and Fall
- Shift Registers
- Balanced Propagation Delays
- Modulo – n – counter
- Latch-up performance
- Bus hold
- Computers
- Dynamic threshold performance
