DM74ALS576AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 30MHz |
| Base Part Number | 74ALS576 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 4 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 18mA |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -2.6mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DM74ALS576AN Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. It is configured with Tri-State, Invertedas an output. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis required for its operation. It is at 0°C~70°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. JK flip flop belongs to the 74ALSseries of FPGAs. In order for it to function properly, its output frequency should not exceed 30MHz. D latch consists of 1 elements. As a result, it consumes 18mA quiescent current and is not affected by external forces. If you search by 74ALS576, you will find similar parts. A part of the electronic system is mounted in the way of Through Hole. As you can see from the design, it has pins with 20. This device has the clock edge trigger type of Positive Edge. Flip flops designed with 8bits are used in this part. To achieve this superior flexibility, 8 circuits are used. If high efficiency is desired, the supply voltage should be kept at 5V. It has 3 output lines to operate. Currently, there are 8 input lines present. The high level output current is set to -2.6mA. The low level output current is set to 24mA. Operating temperatures should be lower than 70°C. It should be higher than 0°Cwhen the system is operating. In order for it to operate, a supply voltage of 4.5Vis required. In this case, it supports a maximum supply voltage of 5.5V. A frequency of 30MHzcan be achieved.
DM74ALS576AN Features
Tube package
74ALS series
20 pins
8 Bits
DM74ALS576AN Applications
There are a lot of ON Semiconductor DM74ALS576AN Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Power down protection
- Frequency Divider circuits
- Cold spare funcion
- Safety Clamp
- Synchronous counter
- Divide a clock signal by 2 or 4
- Individual Asynchronous Resets
- Dynamic threshold performance
- Reduced system switching noise
