DM74ALS576AWMX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 30MHz |
| Base Part Number | 74ALS576 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 4 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 18mA |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -2.6mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DM74ALS576AWMX Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. It is contained within the Tape & Reel (TR)package. It is configured with Tri-State, Invertedas an output. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is at 0°C~70°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. The 74ALSseries comprises this type of FPGA. You should not exceed 30MHzin its output frequency. In total, it contains 1 elements. As a result, it consumes 18mA of quiescent current without being affected by external factors. Members of the 74ALS576family make up this object. Electronic part Surface Mountis mounted in the way. This board is designed with 20pins on it. The clock edge trigger type for this device is Positive Edge. It is designed with 8bits. 8 circuits are used to achieve its superior flexibility. Optimal efficiency requires a supply voltage of 5V. There are 3 output lines in this JK flip flop. As of now, there are 8input lines. A -2.6mAis set for the high level output current. 24mA is the low level output current. A temperature below 70°Cis recommended for operation. It is recommended that the operating temperature is higher than 0°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. There is a maximum voltage support of 5.5V. We are able to achieve a frequency of 30MHz.
DM74ALS576AWMX Features
Tape & Reel (TR) package
74ALS series
20 pins
8 Bits
DM74ALS576AWMX Applications
There are a lot of ON Semiconductor DM74ALS576AWMX Flip Flops applications.
- Cold spare funcion
- Registers
- Modulo – n – counter
- Single Up Count-Control Line
- Storage registers
- ATE
- ESCC
- Common Clocks
- Control circuits
- Differential Individual
