DM74AS574N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 80MHz |
| Family | AS |
| Current - Quiescent (Iq) | 116mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 9 ns |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
DM74AS574N Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. 0°C~70°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the 74AS series. Its output frequency should not exceed 80MHz Hz. A total of 1elements are present in it. It consumes 116mA of quiescent 20terminations have occurred. It is powered from a supply voltage of 5V. In this case, the D flip flop belongs to the ASfamily. As soon as 5.5Vis reached, Vsup reaches its maximum value. The supply voltage (Vsup) should be kept above 4.5V for normal operation. A D flip flop with 2embedded ports is available.
DM74AS574N Features
Tube package
74AS series
DM74AS574N Applications
There are a lot of Rochester Electronics, LLC DM74AS574N Flip Flops applications.
- 2 – Bit synchronous counter
- Frequency division
- Consumer
- Individual Asynchronous Resets
- Safety Clamp
- Differential Individual
- ESD performance
- Common Clocks
- Clock pulse
- Memory
