DM74AS74N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 105MHz |
| Family | AS |
| Current - Quiescent (Iq) | 16mA |
| Current - Output High, Low | 2mA 20mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 9 ns |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
DM74AS74N Overview
As a result, it is packaged as 14-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. This output is configured with Differential. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis used as the supply voltage. In the operating environment, the temperature is 0°C~70°C TA. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 74ASseries of FPGAs. Its output frequency should not exceed 105MHz. D latch consists of 2 elements. There is 16mA quiescent consumption. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A voltage of 5V is used as the power supply for this D latch. It belongs to the family of electronic devices known as AS. There is a 5.5Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 4.5V.
DM74AS74N Features
Tube package
74AS series
DM74AS74N Applications
There are a lot of Rochester Electronics, LLC DM74AS74N Flip Flops applications.
- Circuit Design
- 2 – Bit synchronous counter
- QML qualified product
- Guaranteed simultaneous switching noise level
- Synchronous counter
- Power down protection
- ATE
- Count Modes
- Balanced 24 mA output drivers
- Automotive
