DM74S74N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74S |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 4.75V |
| Clock Frequency | 65MHz |
| Family | S |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| Height Seated (Max) | 5.08mm |
| RoHS Status | Non-RoHS Compliant |
DM74S74N Overview
It is packaged in the way of 14-DIP (0.300, 7.62mm). The package Tubecontains it. T flip flop uses Differentialas the output. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Through Hole. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. A temperature of 0°C~70°C TAis considered to be the operating temperature. This D latch has the type D-Type. FPGAs belonging to the 74Sseries contain this type of chip. This D flip flop should not have a frequency greater than 65MHz. D latch consists of 2 elements. 14terminations have occurred. It is powered by a voltage of 5V . This D flip flop belongs to the family of S. For normal operation, the supply voltage (Vsup) should be above 4.75V.
DM74S74N Features
Tube package
74S series
DM74S74N Applications
There are a lot of Rochester Electronics, LLC DM74S74N Flip Flops applications.
- Balanced Propagation Delays
- Data transfer
- Count Modes
- Frequency Dividers
- Guaranteed simultaneous switching noise level
- CMOS Process
- ESD protection
- Clock pulse
- Synchronous counter
- Storage registers
