DS1232N+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | MicroMonitor™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PUSHBUTTON RESET OPTION |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1232 |
| Output | Open Drain, Push-Pull |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Max Supply Current | 2mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.37V 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.74V |
| Undervoltage Threshold | 3.3V |
| Overvoltage Threshold | 4.74V |
| Height | 2.03mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1232N+ Overview
This power management consists of 8 mounting terminals on which it can be mounted. It is packaged with Tube. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 5V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount, Through Hole mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 8 pins on the board. 8 pins make up the power management. It is recommended that Vsup should not be less than 4.5V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management recommends the Through Hole mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain, Push-Pull. In order to maintain a stable supply current for the power management, 500μA is the recommended value. There are other features such as PUSHBUTTON RESET OPTION to name a few. To find similar IC managements from the manufacturer, you can always search by DS1232. There is a requirement for 5V power to power this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 2mA. The IC power that you are looking at comes from our well-known MicroMonitor? series product line.
DS1232N+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
500μA operating supply current
DS1232N+ Applications
There are a lot of Maxim Integrated DS1232N+ Voltage Supervisors applications.
- emergency room
- Radio
- Detection of phase imbalance
- Electric heating appliances
- Leakage protection
- Leakage current detection
- Computer applications
- Urban rail transit weak current power monitoring
- WiFi router
- Network equipment
