E-SG3525AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Frequency | 722kHz |
| Base Part Number | SG3525 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.2V |
| Output Type | Transistor Driver |
| Output Configuration | Positive |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Quiescent Current | 14mA |
| Control Features | Enable, Soft Start |
| Topology | Buck, Push-Pull |
| Frequency - Switching | 100Hz~400kHz |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Height | -510μm |
| Length | 20mm |
| Width | 7.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
E-SG3525AN Overview
Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 2 numbers. PMIC is packaged in a solid enclosure of Tube. It is capable of handling Transistor Driver dc switching's outputs (s). 8V~35V is the supply voltage and the operating voltage of the dc control. Qualified to work in an dc switcher with 0°C~70°C TA. The switching controller is capable of switching at the 100Hz~400kHz position. It is suitable for general dc dc regulator when it is set to Through Hole. Featured in the dcdc regulator is Enable, Soft Start which allows efficient switching control. SG3525 can be used to locate other relevant dc to dc converter ics. 16 pins are on switching converter. According to the test statistics, DC regulator outputs 5.2V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 400mA. The Through Hole makes DC switcher suitable for most applications and prototypes. Switching controller operates at 722kHz Hz. In a dormant state, the dc switching uses 14mA.
E-SG3525AN Features
Transistor Driver Outputs
Switching Frequency: 100Hz~400kHz
Enable, Soft Start
Frequency: 722kHz
E-SG3525AN Applications
There are a lot of STMicroelectronics E-SG3525AN DC to DC converter applications.
- Handheld GPS
- Imported equipment
- Electrical power transmission
- Combined machine tools
- Servo drive system
- Emergency lighting monitoring equipment
- Packaging
- Printing equipment
- Ball screw pair
- Mobile phones
